134+ Hanging Wall Organizer With Pockets ~ My Wood Blog

Wall organizer 3/7 pockets wall hanging storage bags cotton

www.etsy.com

```html

Introduction: Organizing with Style Tired of cluttered countertops and overflowing drawers? A hanging wall organizer with pockets is a fantastic solution! It's a versatile DIY project that allows you to customize storage to fit your exact needs while adding a touch of personal style to your space. This guide will walk you through creating your own functional and fashionable wall organizer.

Materials You'll Need:

Fabric: Choose a sturdy fabric like canvas, denim, or linen. Consider a main fabric for the body and a contrasting fabric for the pockets. The amount depends on your desired size; a yard of each should be sufficient for a medium-sized organizer.
Lining Fabric (Optional): If using a thinner fabric for the body, a lining will add structure and durability.
Heavyweight Interfacing (Optional): For added pocket support, especially if storing heavier items.
Wooden Dowel or Rod: To hang the organizer. Choose a length slightly wider than your organizer's width.
Twine, Rope, or Ribbon: For hanging the organizer from the dowel.
Sewing Machine: Or needle and thread if you prefer hand sewing.
Scissors or Rotary Cutter: For precise fabric cutting.
Ruler or Measuring Tape: Essential for accurate measurements.
Pins or Clips: To hold fabric pieces together while sewing.
Iron and Ironing Board: For pressing fabric and interfacing.
Matching Thread: For sewing.
Marking Pen or Chalk: For marking cutting lines on fabric.

Step 1: Planning and Cutting Your Fabric First, determine the desired dimensions of your finished organizer. Consider the space you have available and what you plan to store in the pockets. Sketch a quick design on paper, noting the overall width and height, as well as the size and placement of each pocket. Add seam allowances (typically 1/2 inch) to all cut pieces. Cut out the main body fabric (front and back pieces, unless you are folding a single piece). Cut out the pocket pieces in the desired sizes and quantities. If using lining or interfacing, cut those pieces as well.

Step 2: Preparing the Pockets If using interfacing, iron it to the wrong side of your pocket fabric pieces according to the manufacturer's instructions. Fold the top edge of each pocket piece down by 1/2 inch (or more, depending on the desired look) and press. Fold it again by 1/2 inch and press again, creating a double-folded hem. Sew along the bottom of this hem to secure it. This creates a clean, finished edge for the top of your pockets.

Step 3: Attaching the Pockets Arrange the prepared pockets on the right side of the front body fabric piece according to your design. Pin or clip them in place. Sew the pockets to the main fabric. For added strength, consider backstitching at the beginning and end of each seam. You can also add dividers to the pockets by sewing vertical lines through them.

Step 4: Assembling the Organizer If using a lining, place the lining pieces wrong sides together with the main fabric pieces. Baste around all edges to hold them in place. Place the front and back body pieces right sides together. Pin or clip all the way around, leaving a 4-6 inch opening at the bottom for turning. Sew around the perimeter, using a 1/2 inch seam allowance, remembering to leave the opening. Clip the corners to reduce bulk.

Step 5: Turning and Finishing Carefully turn the organizer right side out through the opening. Use a point turner or similar tool to push out the corners. Press the edges of the organizer, paying special attention to the opening. Fold the raw edges of the opening inwards and press. Sew the opening closed, either by hand with a blind stitch or by machine, close to the edge.

Step 6: Creating the Hanging Sleeve Fold down the top edge of the organizer (the side without the pockets) by about 2-3 inches, depending on the diameter of your dowel. Press the fold. Sew across the folded edge, creating a sleeve for the dowel to slide through. Make sure the sleeve is wide enough for your dowel to fit comfortably.

Step 7: Hanging the Organizer Slide the wooden dowel through the sleeve at the top of the organizer. Cut two lengths of twine, rope, or ribbon to the desired length for hanging. Tie each length of twine securely to either end of the dowel. Ensure that the knots are strong and evenly spaced so the organizer hangs straight.

Conclusion: Your Personalized Organizer Congratulations! You've created a custom hanging wall organizer that is both functional and stylish. Hang it in your desired location and fill the pockets with your essentials. Enjoy the benefits of a more organized and visually appealing space. Feel free to experiment with different fabrics, pocket sizes, and embellishments to create a unique organizer that reflects your personal style.

```